C – 80 grade Cold, Rolled & Annealed Steel Strips
Composition: C     : 0.75 - 0.90%
Mn   : 0.50 - 0.90%
Si     : 0.10 – 0.35%
S&P : 0.04% Max
C – 80 grade Cold, Rolled & Annealed Steel Strips C – 80 grade Cold, Rolled & Annealed Steel Strips
This grade of Strip is stocked in Annealed condition, 200 HV Max Hardness. However can also be supplied in different temper in range of 200 – 400 HV on request, please check for Minimum economic batch quantity & lead time.

This is available in ready stock in Thickness range of 4.0 to 0.25 mm in width of 250 - 350 mm, Can be slitted, Sheared, decoiled as per the customers request.

This grade compares well with following grades.

  • AISI 1080/1085
  • CK 75/80
  • HC – 14/ EN - 42J/DIN 17200
  • 80 C6 of IS 2507of 1975
  • JIS - S 80C & Sup 3

This strip is supplied in bright finish & Sheared Edges suitable for bending & forming (refer bend test chart)

And then Heat Treated for required Hardness.

This strip is widely used for manufacturing Circlips, Washers, Spring Dovels, Clutch Segment

Spring steel strips annealed
Cold rolled annealed spring steel strip
Hardened and Tempered Spring Steel Strip